14 Popular Ways To Deal With How To Get A Screw Unstuck

Are you working on any home upgrade projects? Great! but got stuck with a screw and cannot move ahead in the project.

Even if you are not working on these projects, removing a stuck screw will come from a door handle or hinge fixing, furniture repair, plumbing leak repair, or removing any fixture.

As per the Nerdwallet analysis, 61% of homeowners in the US undertake more home improvement and DIY projects to upgrade their homes.

As you may be aware, any minor home repair or DIY project may encounter a stuck screw problem at some point.

That’s why knowing how to get a screw unstuck from any of your projects is important.

A screw is basically our friend during any upgrade or repair to our home as they will be holding objects tight. But it will be really difficult if the screw is old or ages and its head is jammed or stripped.

Then the next question that comes to our mind about how to remove a stuck screw is what kind of tools and techniques should be used.

Well, there is no need to worry. You can consider this post for information on how to get a screw unstuck using time-tested and straightforward methods that will save you time and effort.

Before we get into the post details, we need to understand the structure of a screw to figure out what is causing a screw to get stuck in any material, whether wood, plastic, or metal.

Structure of a Screw

If you’ve ever worked on a repair or maintenance project, you’ve probably noticed that there are several combinations of screw head shape and drive.

To begin with, find a way how to get a screw unstuck. Let’s look at the structure of a screw and its parts. A screw consists of three major sections: the head and drive, the shank, and, after that, thread length.

We can only see the screw head from the surface of any object. The screw’s whole body will go beneath the surface of your material.

Countersunk and non-countersunk screw heads are available. Countersunk screw heads have an angle because they will sit within the material’s surface, but non-countersunk screw heads do not have an angle and will sit outside the material’s surface.

Tools & Material

We may require below tools and material to remove stuck screw.

  • Screwdriver tool sets
  • Screw Extracting Pliers
  • Glue
  • Lube
  • Rotary Tool
  • Light hammer

Ways to remove stuck Screw

A stripped or jammed screw will prevent you from progressing further in your project and will trap you in the middle. .

It is advisable to be patient with the screw that is stuck and try different ways to remove the stuck screw. If one does not work for your screw, there is a chance the other way might work for you.

If you are having the problem of a stuck screw, you can remove the screw in any one of the following ways:

Try different types of screwdrivers

There are many different screw heads, so you must choose which type and size of the screwdriver are appropriate for your screw.

If your screw is stripped, just one or two slots will operate. Therefore, you must inspect the screw with a different screwdriver.

You can try a slightly smaller to more significant head size screwdriver, and then you can try a flat head screwdriver. See if you can fit it into the slot of the stripped screw and rotate it. Place your screwdriver over the screw head to fit into the narrow screw head slot.

You are good to go. Apply some pressure to it and try to unscrew it.

By using Pliers

If you believe your screw has been stuck in the material, and there is sufficient space between the screw and the surface,

Then you can use this pliers method to remove the stuck screw.

You can try to hold your screw with a plier by rotating it. Hold some grip on it and try to pull out the screw.

Once, you can hold the screw with a plier and twist the screw in the left or right direction to take out the screw from the surface.

Finally, the pliers will loosen the screw, and you can easily take it out.

By using valve grinding paste

If your screw is stripped and your screw driver is slipping out of the slot in the screw head.

You can use a little dab of valve grinding paste on the head of your stuck screw. Then fix the screwdriver into the head of the screw and turn it.

Valve grinding paste will work more like a gripping paste and give some grip between the screen driver and your stuck screw.

Try to fix the screw driver into the screw head and turn it to remove the screw.

By using a Drill machine

This is one of the quickest methods for loosening stuck screws.

Remove screw using drill machine

You may now take your drill and attach it to the electricity. A cordless drill will be more handy for you.

Now start drilling in the hole of the screw head. This will create more space for the screwdriver to fit inside the screw head.

When you fix the screwdriver in the stuck screw , it will go deeper, so when you turn it anticlockwise, it will loosen the stuck screw.

By using two tools, A screwdriver and a hammer

You can place your manual screwdriver over your stuck screw.

Then lightly tap it with a hammer. In this way, the screwdriver will go a little deeper into the screw head. And you have enough grip to turn the stuck screw with a screwdriver.

Now you can twist the screwdriver and remove the stuck screw.

By Cutting a new slot

There is a chance that the slot of the stuck screw is worn out. You can cut a new slot for the stuck screw head with a rotary cutting tool.

So that flat-head screwdriver can easily fit into the head, and you can easily twist the stuck screw.

By Pasting a nut on Screw Head

In this method, we will paste a nut over the screw head.

If welding is not feasible at home, try taking strong metal adhesive gum (welding glue) and pasting the nut over the head. Try the nut with the same diameter.

After some time, use a socket wrench to remove the glued or welded nut from the screw. You will remove stuck screws this way.

By applying a lubricant

There might be a moisture issue if you have more humidity in your climate or dampness on the wall. Don’t worry. We have a solution. So how do you remove a stuck screw in this situation?

There will be degradation in the screw quality due to moisture. If your screw is stuck due to rust, you can use lubricating spray or lubricating oil on top of the screw head. This lubrication will loosen the stuck screw quickly and easily.

Apply the lubricant to the screw and tap it with a hammer.

Remove screw using lubricant
Using Lubricating Spray

This procedure will penetrate the fitting and loosen the jammed screw. And it is readily removed from the surface.

By using Steel Wool

Steel wool is the best way to increase the grip between the screw head and the driver.

If you place some steel wool between the screw head and the screwdriver, it will provide a frequent grip on the screw head.

And in this way, the grip will help the stuck screw turn again.

By using Abrasive Powder

It is similar to the steel wool approach in some ways. This procedure will give you a better grip on your stripped screw and allow you to twist it securely.

Apply a little quantity of abrasive powder to the jammed screw before applying pressure with the drill bit. We’ll try to spin the screw head carefully. Check that the drill bit has a good hold on the screw head before starting the drill.

You’ve added the powder to provide friction and keep the drill bit from slipping.

By Rubber Band Technique

If you are doing some electronics repair or starting a new project, a stuck screw will make things more difficult when you know you need to remove the screw.

Well, you will be surprised when you know it is easy to fix.

First, lay a rubber band on the screw head. Then, while spinning, insert the driver bit into the rubber band and press firmly.

This is especially useful when dealing with stuck screws since it allows you to get a better hold on the head of the screw rather than merely using a drill or screw driver.

Your rubber band should be as broad as your screw. A thin rubber band will not provide adequate traction. If you don’t have a rubber band, you may use sewing elastic instead.

By Heat up technique

This technique is suitable for metal surfaces.

You can heat the screw with this method without harming the item or surrounding materials.

If the material is not suitable for heat, avoid this method. If you choose this option, keep your fingers safe by preventing tampering with the screws while they are hot.

By using a claw hammer

If you’re working on a home upgrade project, a screw gets stuck on the surface of the wood.

Remove screw using hammer

Then you may use this claw hammer to pry the jammed screw out of the wood.

By using the Screw Extractor

A screw extractor is a tool used to release a broken or stuck screw. Screw extractors are available in various sizes to remove different screws with varying diameters.

You must choose the correct size drill and screw extractor for the diameter of the screw.

You can purchase a single piece or a whole set of screw extractor. They are suitable for any home improvement job.

Always select the drill bit a little smaller than the screw head.

Place the drill bit over the screw head.

Apply a gentle press and drill it. Hold the drill bit firmly to go straight into the screw head.

After drilling, place the Screw extractor over the drill hole in the screw.

Then rotate the screw extractor in a reverse direction.

If the screw is not coming out readily, apply some pressure.

Finally, you will be able to remove the stuck screw.

Wrap Up: How to Get a Screw Unstuck

Great!!! I hope you know how to get a screw unstuck from any material.

We can’t always prevent stuck screws, but you can find the quickest way to remove a stuck screw with the methods and ideas shown above.

These methods will assist you in removing a stuck screw and save you time.

Before attempting any approach, ensure that you have the necessary tools and materials.

You can use a drill, pliers, a screwdriver, or any of the other tools listed above to loosen your stuck screw.

Some of those methods may take a little longer, while others may be faster depending on experience and tools, so if one does not work, you should try another while working with any stuck screw.

However, do not apply more pressure to any of the methods. If you use one technique for a long time, there is a danger that your screw will strip.

II believe you are now able to remove your stuck screw comfortably. What do you think? Have fun with your DIY project, and happy unscrewing.

FAQ: How to Get a Screw Unstuck

Sometimes, removing a stuck screw is very tricky. While researching this article, I discovered that many people had queries about related topics. So I chose some questions that are relevant to the issue mentioned above.

How to remove a screw with no head?

When discussing how to remove a screw with no head, if the head edges are above the surface level, you can remove it using pliers or a hammer. If the screw is below the surface level, you can drill the screw and then extract it with a screw extractor. In another case, if the screw is on the surface, we can weld or glue a nut on top of the screw and then unscrew it using a wrench. If the screw is above or on the surface, we may also use a rotary tool to cut it.

How to remove a screw from wood?

You can use almost any technique to extract a stripped screw from a piece of wood. Wood Screw extractors and the hammering method may help you remove the screw. If the screw is damaged and has lost its head, leave the damaged screw in the wood. Use your pliers to remove the screw from the wood easily. Preferably nose pliers. If you notice a hole after removing a thicker screw, you can use a bit of wood filler to repair the surface level if necessary.

How to remove a screw from metal?

There are several procedures for removing the screw from the metal. You can add traction between the screw head and screwdriver in simple ways, such as spraying liquid on the screw or spreading lubricant over the screw head. If the screws still do not come out, you can try using a pair of pliers and a hammer to remove the screws. Finally, creating a new slot in the head with a rotary tool may also assist you in removing a screw from metal.

How to loosen tight screws on electronics?

You can use the rubber band method or sewing elastic to remove a tight screw from electronics. You may remove the stuck screw by placing a rubber band over it and unscrewing it with a screwdriver. If this procedure fails, you can use a precision screw extractor. To remove your screw from the electronics, you must use a miniature extractor on the edge of the screw head. Remember to unscrew from the screw’s circumference rather than the screw’s center.

Over the years, she has perfected her expertise in various aspects of home improvement, from crafting inviting kitchens to revitalizing entire living spaces. Through this blog, her mission is to generously share the wealth of hard-earned knowledge, experiences, and insider tips, empowering readers to enhance their homes and turn them into their dream living spaces.

1 thought on “14 Popular Ways To Deal With How To Get A Screw Unstuck”

Comments are closed.